Hot-selling Silica Gel 1-3mm - Alumina Silica Gel JZ-SAG – JIUZHOU
Hot-selling Silica Gel 1-3mm - Alumina Silica Gel JZ-SAG – JIUZHOU Detail:
Description
Chemically stable, flame-resisting. Insoluble in any solvent.
In comparison with fine-pored silica gel, the adsorption capacity of fine-pored silica alumina gel is quite the same when used at low relative humidity,(e.g.,RH =10%, RH= 20%),while its adsorption capacity at high humidity is 6-10% higher than that of fine-pored silica gel.
Application
Mainly used for the dewatering of natural gas, adsorption and separation of light hydrocarbon at variable temperature. It may also be used as catalyst and catalyst carrier in petrochemical industry, industrial drier, liquid adsorbent and gas separator,etc.
Natual Gas Drying
Specification
DATA | UNIT | Silica Alumina Gel | |
size | mm | 3-5 | |
AL2O3 | % | 2-5 | |
Surface Area | m2/g | 650 | |
Adsorption Capacity(25℃) | RH=20% | ≥% | 7 |
RH=40% | ≥% | 14 | |
RH=80% | ≥% | 40 | |
Bulk Density | ≥g/L | 620 | |
Crush Strength | ≥N/Pcs | 160 | |
Pore Volume | ml/g | 0.35-0.5 | |
Loss on heating | ≤% | 3.0 |
Standard Package
25kg/kraft bag
Attention
The product as desiccant cannot be exposed in the open air and should be stored in dry condition with air-proof package.
Product detail pictures:

Related Product Guide:
With state-of-the-art technologies and facilities, strict good quality regulate, reasonable cost, exceptional assistance and close co-operation with prospects, we're devoted to supplying the top benefit for our customers for Hot-selling Silica Gel 1-3mm - Alumina Silica Gel JZ-SAG – JIUZHOU , The product will supply to all over the world, such as: Thailand, Slovak Republic, Ghana, We always insist on the principle of "Quality and service are the life of the product". Till now, our products have been exported to more than 20 countries under our strict quality control and high level service.

The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
