Manufacturer for Mol Sieves - Carbon Molecular Sieve JZ-CMS8N – JIUZHOU

Short Description:

Product Detail

Feedback (2)

We enjoy a very good reputation among our customers for our excellent product quality, competitive price and the best service for 3a Molecular Sieve, Molsiv Adsorbents, Orange Silica Gel, Our Enterprise Core Principle: The prestige 1st ;The quality guarantee ;The customer are supreme.

Manufacturer for Mol Sieves - Carbon Molecular Sieve JZ-CMS8N – JIUZHOU Detail:

Description

JZ-CMS8N is a new kind of non-polar adsorbent, designed for the enrichment of nitrogen from air, and has a high adsorption capacity from oxygen. With its characteristic of high efficiency, low air consumption and high purity nitrogen capacity. JZ-CMS8N is a material containing tiny pores of a precise and uniform size that is used as an adsorbent for gases. When the pressure is high enough, the oxygen molecules, which pass through the pores of CMS much faster than the nitrogen molecules, are adsorbed, while the coming out nitrogen molecules will be enriched in gas phase. The enriched oxygen air, adsorbed by the CMS, will be released by reducing the pressure. Then the CMS is regenerated and ready for another cycle of producing nitrogen enriched air.

For one ton of CMS8N,we can get 280 m3 of Nitrogen with purity 99.5% per hour under same working condition.

Application

Used to separate N2 and O2 in the air in the PSA system.

Nitrogen generator use carbon molecular sieve (CMS) as adsorbent. Usually use two adsorption towers in parallel, control the inlet pneumatic valve automatically operated by the inlet PLC, alternately pressurized adsorption and decompressing regeneration, complete nitrogen and oxygen separation, to obtain the required high purity nitrogen

Compressed Air Drying

Organic solvent dehydration

Desiccant Packs

Specification

Type	Unit	Data
Diameter size	mm	1.0
Bulk Density	g/L	620-700
Crush Strength	N/Piece	≥40

Technical Data

Type	Purity（%）	Productivity(Nm³/h.t)	Air / N²
JZ-CMS8N	99.5	280	2.3
	99.9	190	3.4
	99.99	135	4.5
	99.999	90	6.4
Testing size	Testing Temperature	Adsorption Pressure	Adsorption Time
0.9-1.1	≦20℃	0.75-0.8Mpa	2*45s

Standard Package

20kg ; 40kg ; 137kg / plastic drum

Attention

The product as desiccant cannot be exposed in the open air and should be stored in dry condition with air-proof package.

Product detail pictures:

Related Product Guide:

With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of Manufacturer for Mol Sieves - Carbon Molecular Sieve JZ-CMS8N – JIUZHOU , The product will supply to all over the world, such as: Guatemala, Victoria, Sydney, Our company always committed to meet your quality demand, price points and sales target. Warmly welcome you open the boundaries of communication. It is our great pleasure to service you if you need a trusted supplier and value information.

Activated Carbon